Chemical Engineering

Physical Chemistry Research for Engineering and Applied Sciences, Volume 3
High Performance Materials and Methods

Editors: Eli M. Pearce, PhD
Bob A. Howell, PhD
Richard A. Pethrick, PhD, DSc
Gennady E. Zaikov, DSc

Physical Chemistry Research for Engineering and Applied Sciences, Volume 3

Published. Available now.
Pub Date: April 2015
Hardback Price: see ordering info
Hard ISBN: 9781771880589
Paperback ISBN: 978-1-77463-094-5
E-Book ISBN: 9781482262322
Pages: 296 pp + index
Binding Type: hardbound / ebook / paperback

Now Available in Paperback


This volume presents the various categories of high-performance materials and their composites and provides up-to-date synthesis details, properties, characterization, and applications for such systems in order to give readers and users better information to select the required material.

The volume provides the following features:
  • Inclusion of a wide range of high performance and engineering materials
  • Details on the synthesis and properties of each of new materials
  • Orientation toward the practical industrial applications
  • Chapters from some of the world’s most well-known and respected experts in the field


Click here for information on Volume 1.
Click here for information on Volume 2.

See information on the complete set here: http://www.appleacademicpress.com/physical-chemistry-research-for-engineering-and-applied-sciences-set-of-3-volume-vol-i-principles-and-technological-implicationbrvol-ii-polymeric-materials-and-processingbrvol-iii-high-performance-materials-and-methods/9781771880596

CONTENTS:
Preface
Chapter 1. Regularity of Oxidation of Waste Fibrous and Film Materials of Polyethylene and Polypropylene: A Research Note
M. V. Bazunova, S. V. Kolesov, R. F. Tukhvatullin, E. I. Kulish, G. E. Zaikov

Chapter 2. A Research Note on Creation of ?arbon-Polymer Nanocomposites with Polyethylene as a Binder

Sergei V. Kolesov, Marina V. Bazunova, Elena I. Kulish, Denis R. Valiev, and Gennady E. Zaikov

Chapter 3. A Research Note on the Influence of Hybrid Antioxidants Ichphans on the Structure of Liposome Lipid Bilayer

E. Yu. Parshina, L. Ya. Gendel, and A. B. Rubin

Chapter 4. Dynamically Vulcanized Thermoelastoplastics Based on Butadiene-Acrylonitrile Rubber and Polypropylene Modified Nanofiller

S. I. Volfson, G. E. Zaikov, N. A. Okhotina, A. I. Nigmatullina, O. A. Panfilova, A. A. Nikiforov

Chapter 5. Model Representations of the Effect of Temperature on Resistance Polypropylene Filled with Carbon Black

N. N. Komova and G. E. Zaikov

Chapter 6. A Research Note on Kinetics of Release Medicinal Substances from Chitosan Films

Angela Shurshina, Elena Kulish, and Roman Lazdin

Chapter 7. Viscometry Study of Chitosan in Acetic Acid Solution: A Research Note

Valentina Chernova, Irina Tuktarova, Elena Kulish, Gennady Zaikov, and Alfiya Galina

Chapter 8. The Role of H-Bonding Interactions (and Supramolecular Nanostructures Formation) in the Mechanisms of Homogenous and Enzymatic Catalysis by Iron (Nickel) Complexes

L. I. Matienko, L. A. Mosolova, V. I.binyukov, E. M. Mil, and G. E. Zaikov

Chapter 9. Nanocomposite Foils Based on Silicate Precusor with Surface-Active Compounds: A Research Note

L. O. Zaskokina, V. V. Osipova, Y. G. Galyametdinov, and A. A. Momzyakov

Chapter 10. Interaction of the 1,1,3-Trimethyl-3-(4-Methylphenyl)Butyl Hydroperoxide with Tetraethylammonium Bromide

N. ?. ?urovskij, Yu. V. Berestneva, E. V. Raksha, M. Yu. Zubritskij, and G. ?. Zaikov

Chapter 11. Promises of Personalized Medicine in the 21st Century

Sanjay Kumar Bharti and Debarshi Kar Mahapatra

Chapter 12. Some Aspects of Molecular Mechanics and Dynamics Interactions of Nanostructural Elements

A. V. Vakhrushev and A. M. Lipanov

Chapter 13. A Detailed Review on Structure and Properties of High Performance Carbon Nanotube/Polymer Composites

A. K. Haghi and G. E. Zaikov

Chapter 14. Controlled Immobilized Enzymes As Catalysts with Particular Application in Industrial Chemical Processes

M. S. Mohy Eldin, M. R. El-Aassar, and E. A. Hassan

Index


About the Authors / Editors:
Editors: Eli M. Pearce, PhD
Former President, American Chemical Society; Former Dean, Faculty of Science and Art, Polytechnic Institute of New York University, New York, USA

Dr. Eli M. Pearce was President of American Chemical Society. He served as Dean of the Faculty of Science and Art at Polytechnic Institute of New York University, as well as a professor of chemistry and chemical engineering. He was Director of the Polymer Research Institute, also in Brooklyn. At present, he consults for the Polymer Research Institute. A prolific author and researcher, he edited the Journal of Polymer Science (Chemistry Edition) for 25 years and was an active member of many professional organizations.

Bob A. Howell, PhD
Professor, Department of Chemistry, Central Michigan University, Mount Pleasant, Michigan, USA

Bob A. Howell, PhD, is a professor in the Department of Chemistry and Director of the Center for Applications in Polymer Science at Central Michigan University in Mount Pleasant, Michigan. He received his PhD in physical organic chemistry from Ohio University in 1971. His research interests include flame retardants for polymeric materials, new polymeric fuel-cell membranes, polymerization techniques, thermal methods of analysis, polymer-supported organoplatinum antitumor agents, barrier plastic packaging, bioplastics, and polymers from renewable sources. A particular current research interest is the development of nontoxic, environmentally friendly flame retardants based on renewable biosources.

Richard A. Pethrick, PhD, DSc
Research Professor and Professor Emeritus, Department of Pure and Applied Chemistry, University of Strathclyde, Glasgow, Scotland, UK

Richard A. Pethrick, PhD, DSc, is currently a research professor and professor emeritus in the Department of Pure and Applied Chemistry at the University of Strathclyde, Glasglow, Scotland. He was Burmah Professor in Physical Chemistry and has been a member of the staff there since 1969. He has published over 400 papers and edited and written several books. He currently holds a number of EPSRC grants and is involved with Knowledge Transfer Programmes involving three local companies involved in production of articles made out of polymeric materials. He has acted as a consultant for BAE Systems in the area of explosives and a company involved in the production of anticorrosive coatings. Dr. Pethrick is on the editorial boards of several polymer and adhesion journals and was on the Royal Society of Chemistry Education Board. He is a Fellow of the Royal Society of Edinburgh, Royal Society of Chemistry, and the Institute of Materials, Metals and Mining. Previously he chaired the Review of Science Provision 16-19 in Scotland and the restructuring of the HND provision in Chemistry. He was for a number of years the Deputy Chair of the EPSRC IGDS panel and involved in a number of reviews of the courses developed and offered under this program. He has been a member of the review panel for polymer science in Denmark and Sweden and the National Science Foundation in the USA.

Gennady E. Zaikov, DSc
Head, Polymer Division, N. M. Emanuel Institute of Biochemical Physics, Russian Academy of Sciences; Professor, Moscow State Academy of Fine Chemical Technology; Professor, Kazan National Research Technological University, Russia

Gennady E. Zaikov, DSc, is Head of the Polymer Division at the N. M. Emanuel Institute of Biochemical Physics, Russian Academy of Sciences, Moscow, Russia, and professor at Moscow State Academy of Fine Chemical Technology, Russia, as well as professor at Kazan National Research Technological University, Kazan, Russia. He is also a prolific author, researcher, and lecturer. He has received several awards for his work, including the Russian Federation Scholarship for Outstanding Scientists. He has been a member of many professional organizations and on the editorial boards of many international science journals.




Follow us for the latest from Apple Academic Press:
Copyright © 2025 Apple Academic Press Inc. All Rights Reserved.