Electronics and Communications Technology

Smart Innovations and Technological Advancements in Civil and Mechanical Engineering
Editors: Satish Chinchanikar, PhD
Ashok Mache, PhD
Shardul G. Joshi, PhD
Preeti Kulkarni, PhD

Smart Innovations and Technological Advancements in Civil and Mechanical Engineering

Published. Available now.
Pub Date: Forthcoming Fall 2024
Hardback Price: see ordering info
Hard ISBN: 9781774914120
E-Book ISBN: 9781003539582
Pages: 314pp w/index
Binding Type: Hardback / eBook
Notes: 23 color and 156 b/w illustrations

This new volume presents chapters on how smart innovations are rapidly changing the materials and machining processes and structural engineering applications of machine learning in the areas of natural and renewable energy. It presents diverse research on state-of-art technology in materials and manufacturing engineering; in design engineering, automation, and electric vehicle technology; in structural engineering; and in environmental and water resources engineering.

The book will be valuable for students and professionals alike on how smart innovations are rapidly changing the materials and machining processes, structural engineering, and applications of machine learning in the areas of natural and renewable energy.

CONTENTS:
Preface

Introduction

PART I: MATERIALS AND MANUFACTURING ENGINEERING

1. A Nanoclay-Reinforced Jute-Polyester Nanocomposite for Enhanced Mechanical Performance
Anindya Deb, Ashok Mache, and Gude Venkatesh

2. Effect of Epoxidized Soyabean Oil on Mechanical and Structural Properties of Sepiolite-Filled Polypropylene/Polyolefin Elastomer Composites
M. B. Kulkarni, R. Kumbhakarna, D. S. Bhutada, Bhushan Hazare, S. Thorat, S. Radhakrishnan, and Y. S. Munde

3. Process Parameter Optimization by Ant Lion Algorithm of Austenitic Stainless Steel (SS 304) for Cutting Force in Turning Using PVD-Coated Tools Deposited with TiAlN/TiSiN Coating Materials
Christoph Schiffers, Manish Adwani, Omkar Kulkarni, Atul Kulkarni, and Ganesh Kakandikar

4. Electrical Discharge Machining Process Optimization during Machining of EN19 Alloy Steel Using Desirability Concept
Vijay Kumar S. Jatti, Vinay Kumar S. Jatti, Savita V. Jatti, Pawandeep Dhall, and Satish Chinchanikar

5. Some Studies on Hole Feature Recommendation for Additive Manufacturing Processes
Dama Y. B., Bhagwan F. Jogi, and R. S. Pawade

PART II: DESIGN ENGINEERING, AUTOMATION, AND ELECTRIC VEHICLE TECHNOLOGY

6. Comparative Evaluation of Modal and Harmonic Analysis of Stepped Horn for Ultrasonic Vibration Assisted Turning
Govind S. Ghule, Sudarshan Sanap, Satish Chinchanikar, and Avez Shaikh

7. Design and Analysis of Wing for Unmanned Aerial Vehicle
Pranit Dhole, Ratnakar Ghorpade, and Chetan Patil

8. Estimation of Modal Loss Factor of Viscoelastic Material Using Modal Strain Energy Method
Gorakh Pawar, Pravin Hujare, Anil Sahasrabudhe, and Deepak Hujare

9. Crop Yield Prediction and Leaf Disease Detection Using Machine Learning
Sachin S. Sawant, Dyuti Bobby, Atharva Dusane, and Gaurav Durge

PART III: STRUCTURAL ENGINEERING

10. Buckling Analysis of Thin-Walled Cylinder under Axial Compression and Internal Hydrostatic Pressure Using Finite Element Model
Saurabh Patil, Ashok Mache, and Shardul Joshi

11. Seismic Behavior of Buckling Restrained Brace Installed Steel Buildings
Prajakta Shete, Shweta Sajjanshetty, and Suhasini Madhekar

12. Non-Linear Dynamic Analysis of Multi-Story R. C. C. Buildings Having Different Geometry
Mahesh Pathare and Ramchandra Apte

13. Application of Average Response Spectrum for Analysis of Structures
Praveen Ashok Patil, Shradul Joshi, and Rahul Joshi

14. Fluid Dynamics Analysis of Liquid Sloshing in a Rectangular Container under Lateral Excitation
Saurabh Patil and Shardul Joshi

15. Study of Mechanical and Micro Structural Properties of Fly Ash and GGBS-Based Geopolymer Concrete
Shivdatta B. Bhosale, S. G. Joshi, R. A. Joshi and J. P. Watve

PART IV: ENVIRONMENTAL AND WATER RESOURCES ENGINEERING

16. Application of Solar Dryer for Drying of Agricultural Products
Tanvi Shah, and Krishnakedar Gumaste

17. Flow Estimation and Flood Forecasting over Narmada River Using Three Data-Driven Techniques
Rohit Gaikwad, Ramchandra Kavanekar, Pradnya Dixit, and Dr. Preeti Kulkarni

18. Correlating Stage Measurement Stations Using Three Data-Driven Techniques: A Comparative Assessment
Aalisha Lanjewar, Vishakha Kondhalkar, Pradnya Dixit, and Preeti Kulkarni

Index


About the Authors / Editors:
Editors: Satish Chinchanikar, PhD
Professor, Vishwakarma Institute of Information Technology, India

Satish Chinchanikar, PhD, is currently working as a Professor at the Vishwakarma Institute of Information Technology, India. His main research interest is in advanced manufacturing processes and machining of hard alloys using coated tools. He has over 25 years of teaching and industry experience and has published over 100 papers in international journals and conferences. He has authored a book chapter on finish machining of hardened steels published by Elsevier and a textbook on advanced manufacturing processes. He has been awarded an excellent paper certificate at the International Conference on Key Engineering Materials in Malaysia. He is working as a reviewer for many peer-reviewed international journals. His work has received over 2000 citations, and he has an h-index 21 for his work. Dr. Chinchanikar has published five patents and holds three copyrights to date. He strongly believes that teaching and research should go hand in hand. He received his PhD from the Indian Institute of Technology Kanpur and received a master’s from Pune University, India.

Ashok Mache, PhD
Associate Professor, Vishwakarma Institute of Information Technology, India

Ashok Mache, PhD, is currently working as Associate Professor at Vishwakarma Institute of Information Technology, India. His main research interest is in composite materials, advanced finite element modelling, and vehicle dynamics. He has over 18 years of teaching and industry experience and has published m0re than 20 papers in international journals and conferences. He has authored two book chapters in Bio-composites for Automotive Applications. He is working as a reviewer for peer-reviewed international journals. He has received 400+ citations and has an h-index 11 for his work and holds one copyright. He received his PhD from the Indian Institute of Science, Bangalore, India.

Shardul G. Joshi, PhD
Professor, Department of Civil Engineering at Vishwakarma Institute of Information Technology, Pune, India

Shardul G. Joshi, PhD, is working as Professor in the Department of Civil Engineering at the Vishwakarma Institute of Information Technology, Pune, India. He has over 20 years of teaching experience. He has published eight research papers in conferences and journals and holds one patent. He has completed his doctoral studies at Thapar University Patiala, Punjab, India.

Preeti Kulkarni, PhD
Associate Professor at Vishwakarma Institute of Information Technology, India

Preeti Kulkarni, PhD, is currently working as Associate Professor at the Vishwakarma Institute of Information Technology, India. Her main research interests are construction management, concrete technology-recycled materials, and soft computing applications in civil engineering. She has more than 18 years of teaching and industry experience and has published over 20 papers in international journals and over 25 in international conferences. She is working as a reviewer for peer-reviewed international journals. She has also authored one book, titled Infrastructure Engineering and Construction Economics. She received her PhD in Concrete Technology from Shivaji University, India.




Follow us for the latest from Apple Academic Press:
Copyright © 2025 Apple Academic Press Inc. All Rights Reserved.